|
Quick Request Form
The new LS-B10W and RD-10W system adds to the productivity of
your job site. Both utilize magnetic mountings and when used in conjunction with a Topcon laser level, the combination and
productivity is unbeatable.
- Small, Lightweight design
- 270º detection
- Rugged, Waterproof design
- Wireless Support and CAN support
- Magnetic mounts for use anywhere
The LS-B10W mounts on the part of the machine that you wish to
keep on grade. It sends its leveling information wirelessly back to the RD-10W remote display that is mounted in the cab where
the operator can better see the grade information. All this functionality with a low cost price too!
Not limited
to machine mounting only, the LS-B10 and LS-B10W sensors have an optional grade rod mount bracket as well.
| Detector |
| Detector Length |
4.72 ", 120 mm |
| Detector Angle |
270° |
| Display |
| On-Grade Zone (LED) |
.08, .24, .47, 1.18 inches, 2, 6, 12, 30 mm |
| LED Grade Indicators |
Red (up arrow) , Green (–), Red (down arrow) |
| LED Grade Patterns |
5 grade, 2 lost beam, 1 low battery, 1 level alert |
| LCD |
one side |
| LCD Grade Indicators |
11 channels, on-grade + 5 gradual triangles |
| LCD Backlight |
yes(wo/Auto) |
| Low Battery Indicator |
LED pattern & LCD symbol |
| Transmitter Low Battery Ind. |
LCD symbol |
| Transmitter Level Indicator |
LCD symbol |
| Physical |
| Mountings |
built-in magnet mount, grade rod clamp attachement |
| Dual Sided Magnet Mount |
yes |
| Buttons |
4 (1power, 1mode, 1buzzer, 1BT) |
| Beeper |
dual tone; loud and light |
| Ports |
CAN ,Bluetooth |
| Connectors |
one for CAN (M12) |
| Housing |
ABS |
| Batteries |
3 AA dry cell Alkaline, no rechargeable |
| Battery Life |
Approximately 20 Alkaline hours, N/A rechargeable hours |
| Environmental |
| Operating Temperature |
-20 to +50 degrees Celsius |
| Storage Temperature |
-30 to +60 degrees Celsius |
| Humidity |
95% 40°C 48H |
| Vibration |
JIS A 8101 |
| Electrical |
EN55022 Class A, IEC801-2, IEC801-3 |
| Waterproof |
IP66 |
| Other |
| Optional Remote Grade Display |
yes; RD-10W, via BT |
| Power Save and Laser-on |
power save in after 5 min with no beam detection, power back upon Laser |
| Auto Shutoff |
after 30 minutes |
| Mode to turn off LED |
yes |
| Bluetooth |
yes |
|
